Flow Wall® Complete 3 Drawer Cabinet - Graphite Carbon Fiber
- Drawer Cabinet: 24 in. wide x 26 in. tall x 16 in. deep.
- Drawer Bins: 21.5 in. wide x 6.25 in. tall x 15 in. deep.
- Each drawer holds up to 50 lbs
- Carbon Fiber Textured Finish
- Cabinets are constructed from a high density press board with textured PVC laminate.
- Doors made from high quality MDF
Assembly required: Yes
more information about this kit
Ratings & Reviews
by James L
The drawers are nice quality. If I can offer one tip; Start with the top drawer and mount the slide flush with the bottom of the top board. Then install on every third stringer, and then put only one screw on the only hole that allows for adjustment. Put the drawer in and adjust until the drawer is perfect, then remove the drawer tighten up the screw, test it again, and if it remained in location then take the drawer back out install the other two screws into the slides and then you are done. Work your way down and repeat. Also, use a short level to get the next slide in position, then the first screw put in the very center of the slotted hole for adjustment. Once the drawer is where you want it, tighten that one down and then install the other two screws.